KW - Subaru 02-03 WRX - Coilovers Variant 1 inox-line Kit
KW - Subaru 02-03 WRX - Coilovers Variant 1 inox-line Kit
KW - Subaru 02-03 WRX - Coilovers Variant 1 inox-line Kit
KW

KW - Subaru 02-03 WRX - Coilovers Variant 1 inox-line Kit

SKU: KW-10245002 ISBN: 000000001781
$2,054.00
$2,054.00

The KW Variant 1 "inox-line" Coilover kit is KW Suspension's entry model for increased driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion-resistant springs, and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.

Continuous lowering. With the KW Variant 1 Coilover, you can achieve maximum lowering in the TÜV-tested adjustment range. Depending on the vehicle model variance ranges between 30 to 70mm or 50 to 90mm. Even after years of use, you can easily adjust the height due to the dirt-resistant trapezoid thread and composite collar. Lowering at the front axle is made using a one-piece composite height adjuster, on the rear axle this is the same unless the car has a separate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

Setup Factory pre-configured damping setup: The KW Coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly so that you will experience an optimized balance of sportiness and comfort while driving.

Even with a full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus is Show & Shine events are interested in the KW Variant 1 inox-line.


The ideal system for customers who like to choose the customer lowering of their vehicles while counting on the extensive driving tests of our experienced engineers who have preset the dampers for the ultimate balance between sporty driving, comfort, and safety.

 

Weight: 57.30 lbs
Length: 30.00"
Width: 18.00"
Height: 6.00"

 

SPECIFICATIONS:

  • Front Drop Height: 0.8"-2.0"
  • Rear Drop Height: 0.8"-2.0"
  • Front Coil Spring Rate: 6.1 kg/mm (340 lbs/in)
  • Shock Absorber Internal Design: Twin-Tube
  • Shock Absorber Type: Hydraulic
  • Shock Absorber Adjustment Type: Without Adjustment
  • Front Shock Absorber Height Adjustment Type: Threaded Spacer
  • Rear Shock Absorber Height Adjustment Type: Threaded Spacer
  • Shock Absorber Reservoir: Without External Reservoir
  • Shock Absorber Material: Stainless steel

 

INCLUDED:

  • (2) Front Coilovers 
  • (2) Rear Coilovers
  • (1) KW Tool Kit

 

FITMENT:

  • Subaru 02-03 WRX